ACard has a new Solid State Drive that supports up to 64Gb of DDR2. While this particular model ( ANS-9010 ) was designed as a 5.25 drive they also have a model designed for 2.5 drives. While you will be able to increase speed over traditional drives, you won’t be saving any money at $399.00 and no.. Ram isn’t included.
Supports up to 64GB amount of memory
Supports ECC/Non-ECC DDR2 400/533/667/800**
Automatic data backup/restore between DDR2 memory and CF card
Built-in Lithium Battery
LED indicators for battery capacity, power status, SATA ports activity, backup status
Driver less: need no driver on host side
**Note: Please refer to Compatibility List for DDR2 RAM Module
Two SATA 3.0Gbps Interface ports
240-pin DDR2 DIMM module slots x 8
One CF socket in front panel
Lithium Battery of 7.4V 2400mAh, enough to finish the backup
Data transfer rate up to 400MB/sec
IOPS 130,000 per SATA port
Dimension: 42(H) x 145(W) x 214 (D) mm
ANS-9010 x1
User Install Guide x1
Internal SATA Cable 50cm x2
15pin SATA Power Cable x1
Screw x4
Lithium Battery x1
**Product does not include DDR2 RAM Module
|
|
|
Leave a Reply
You must be logged in to post a comment.